5 03, 2018

ISO14555: Welding — Arc stud welding of metallic materials

By | 2018-03-05T22:21:12+00:00 March 5th, 2018|Blog|

ISO14555: Welding — Arc stud welding of metallic materials Brief Introduction The purpose of arc stud welding is to weld predominantly pin-shaped metal parts to metal workpieces. In ISO14555 International Standard, it is referred to simply as stud welding. Amongst other things, stud welding is used in bridge building (especially in composite structures),

7 02, 2018

How to measure the ductility of shear stud?

By | 2018-02-12T08:26:40+00:00 February 7th, 2018|About Sino Stone, AWSD1.1, Blog, BS5950, ISO13918, Testing|

Ductility of shear stud Recently one of our Indian clients asked the question about the reduction of area of shear stud, and he only knows the elongation of shear stud, the two parameters belong to the ductility of shear stud. This post will talk this topic. The shear studs(also called shear connectors) are

3 02, 2018

How to prevent magnetic arc blow

By | 2018-02-12T08:26:58+00:00 February 3rd, 2018|About Sino Stone, Blog, Stud welding machines|

Magnetic arc blow One of our Singapore clients gave us feedback about the welding problems when they used the Nelweld 6000 to weld our shear studs. "Your studs are OK, the ceramic ferrules are also OK, and we weld as per Nelweld's settings, why does this happen?" 

21 01, 2018

AWSD1.1 Type B for Shear Connector | Sino Stone

By | 2018-02-12T08:27:10+00:00 January 21st, 2018|AWSD1.1, Blog|

AWSD1.1 Type B At the manufacturer’s option, mechanical properties of shear studs shall be determined by testing either the steel after cold finishing or the full diameter finished studs. In either case, the studs shall conform to the standard properties shown in the following table. AWSD1.1 Type A: Tensile Strength: 61,000psi(min) /

2 01, 2018

Shear studs welding machine price

By | 2018-02-12T08:27:25+00:00 January 2nd, 2018|About Sino Stone, Blog, Stud welding machines|

Shear Studs Welding Machine Price When you google "Shear studs welding machine price" in www.google.com, it will show about 352,000 results (0.73 seconds) , there are four advertisements, please see them as follows: From the advertisements, you can find two German companies(Taylor and Koco) and two USA ones(Advanced and Cutlass). You can't find

12 09, 2017

Stud Welding Machine Prices India

By | 2018-02-12T08:27:38+00:00 September 12th, 2017|Blog, Stud welding machines|

Stud Welding Machine Prices India When you search "Stud Welding Machine Prices India" in www.google.com, it will show about 421,000 results(0.93 seconds), Koco from Germany is in the first advertisement place. Top 3 normal search place is held by the B2B platform Indiamart, which is similar as Alibaba in China,  that is to

29 07, 2017

BS5950 stud shear connectors

By | 2018-02-12T08:28:00+00:00 July 29th, 2017|Blog, BS5950|

BS5950 Stud Shear Connectors BS5950 in Wikipedia BS 5950 is a withdrawn British Standard for the design, fabrication, and erection of structural steelwork. It does not apply to bridges, which are covered by BS 5400. BS 5950 replaced BS 449, which used a permissible stress approach, and uses limit state

11 05, 2017

Comparison of shear connector for main standards

By | 2018-02-12T08:28:14+00:00 May 11th, 2017|AWSD1.1, Blog, ISO13918|

Comparison of shear connector for main standards Q1: How many standards for shear connector do you know? A: There are many standards for shear connectors: BS EN ISO13918:2008, ASW D1.1:2010, AS/NZS 1554.2:2003, JIS B 1198:2011, BS5400-6, BS5950, GB/T 10433:2002, etc. ISO13918, AWS D1.1, BS5950 are most popular by the customers.   Q2: What

21 02, 2017

Fully threaded studs

By | 2018-02-12T08:28:46+00:00 February 21st, 2017|Blog, Threaded studs|

Fully Threaded Studs Fully threaded studs(also called full threaded studs) are one of the two most common studs. The threads on a Fully Threaded Studs run the full length of the fastener (hence called fully threaded). This simplifies many mating part concerns and is a favorite of engineering. Also, a Pitch Diameter