February 2018

How to measure the ductility of shear stud?

By |2018-02-12T08:26:40+08:00February 7th, 2018|About Sino Stone, AWSD1.1, Blog, BS5950, ISO13918, Testing|

Ductility of shear stud Recently one of our Indian clients asked the question about the reduction of area of shear stud, and he only knows the elongation of shear stud, the two parameters belong to the ductility of shear stud. This post will talk this topic. The shear studs(also called shear connectors) are

May 2017

Comparison of shear connector for main standards

By |2018-02-12T08:28:14+08:00May 11th, 2017|AWSD1.1, Blog, ISO13918|

Comparison of shear connector for main standards Q1: How many standards for shear connector do you know? A: There are many standards for shear connectors: BS EN ISO13918:2008, ASW D1.1:2010, AS/NZS 1554.2:2003, JIS B 1198:2011, BS5400-6, BS5950, GB/T 10433:2002, etc. ISO13918, AWS D1.1, BS5950 are most popular by the customers.   Q2: What

October 2016

Weld Studs | Threaded Stud with Shaft Reduced |Sino Stone

By |2018-02-12T08:30:29+08:00October 13th, 2016|Blog, ISO13918|

Weld Studs Weld Studs, also known as “drawn arc welding stud”, are usually joined with another piece of metal together by heating both parts with an arc. The welding studs are usually joined to a flat plate by using the stud as one of the electrodes. The polarity used in stud welding

September 2016

How to test mechanical properties of shear stud?

By |2018-02-12T08:31:41+08:00September 28th, 2016|About Sino Stone, AWSD1.1, Blog, BS5950, ISO13918, Testing|

How to test mechanical properties of shear stud? Metals used in fastener(shear stud, bolt, etc) manufacture are elastic materials which will stretch (elongate) under applied loads and return to their original shape when the load is removed. However, if sufficient load is applied, the material will stretch beyond its yield point and enter a

August 2016

Factory production control of shear stud

By |2018-02-12T08:39:08+08:00August 7th, 2016|Blog, ISO13918|

Factory Production Control The manufacturer shall establish, document and maintain an FPC(factory production control) system to ensure that the products placed on the market conform to declared performance characteristics. The FPC system shall consist of written procedures (works manual), regular inspections and tests and/or assessments, and the use of the results to

July 2016

Symbols and Abbreviated terms in ISO13918:2008

By |2018-02-12T08:40:10+08:00July 8th, 2016|Blog, ISO13918|

Symbols Abbreviated Terms ISO13918 here are 21 symbols and abbreviated terms in ISO13918:2008(E), today I’ll show you their meaning, hope it can help you understand the standards. Some guys normally can’t understand the meaning of drawing of the shear stud because of the symbols and abbreviated terms in ISO13918,

Go to Top