Ductility of shear stud Recently one of our Indian clients asked the question about the reduction of area of shear stud, and he only knows the elongation of shear stud, the two parameters belong to the ductility of shear stud. This post will talk this topic. The shear studs(also called shear connectors) are
BS5950 Stud Shear Connectors BS5950 in Wikipedia BS 5950 is a withdrawn British Standard for the design, fabrication, and erection of structural steelwork. It does not apply to bridges, which are covered by BS 5400. BS 5950 replaced BS 449, which used a permissible stress approach, and uses limit state
Fully Threaded Studs Fully threaded studs(also called full threaded studs) are one of the two most common studs. The threads on a Fully Threaded Studs run the full length of the fastener (hence called fully threaded). This simplifies many mating part concerns and is a favorite of engineering. Also, a Pitch Diameter
How to test mechanical properties of shear stud? Metals used in fastener(shear stud, bolt, etc) manufacture are elastic materials which will stretch (elongate) under applied loads and return to their original shape when the load is removed. However, if sufficient load is applied, the material will stretch beyond its yield point and enter a
Symbols Abbreviated Terms ISO13918 here are 21 symbols and abbreviated terms in ISO13918:2008(E), today I’ll show you their meaning, hope it can help you understand the standards. Some guys normally can’t understand the meaning of drawing of the shear stud because of the symbols and abbreviated terms in ISO13918,
Welcome to Sino Stone Industrial Limited. This is our first post. Sino Stone focus on stud welding & stud welder for 30 years, which can provide for you according to ISO13918, AWS D1.1, AS/NZS1554.2, JIS B1198, BS5950, GB/T10433, etc. or designing and producing as per your drawing. What is our blog for?